Paper
19 November 1985 Single Mode Fiber Optic Splicing Techniques And Statistical Analysis
Eduardo Paz, Sudhesh Mysore, David Martin
Author Affiliations +
Abstract
Two methods employed during fusion splicing as well as two methods for calculating the average splice loss per fiber-span are presented. The two splicing methods described are the telemetry and optical time domain ref lectometer (OTDR) methods. The cut-back and OTDR measuring methods for calculating the average splice loss per fiber-span are also described. A statistical model relating the various measuring uncertainties with the sample size uncertainties is used to predict the population parameters from the sample statistics. Laboratory results are also included to analyze the important parameters needed for splice optimization. The accuracy of splice loss measurements obtained using OTDRs is studied in the laboratory and is used to analyze field data. Our results show that there is no significant difference in the quality of the telemetry splicing method as compared to the OTDR splicing method. In addition, the average splice loss per fiber-span calculated from cut-back measurements was found to yield a distribution that is only 80% as accurate as the one derived from the OTDR measurements.
© (1985) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Eduardo Paz, Sudhesh Mysore, and David Martin "Single Mode Fiber Optic Splicing Techniques And Statistical Analysis", Proc. SPIE 0559, Fiber Optics: Short-Haul and Long-Haul Measurements and Applications III, (19 November 1985); https://doi.org/10.1117/12.949589
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fusion splicing

Statistical analysis

Error analysis

Signal attenuation

Fiber optics

Fiber optics tests

Single mode fibers

Back to Top