11 December 1985 HgCdTe Focal Plane Development Concepts
Author Affiliations +
As advanced infrared systems are designed and developed, the requirement for greater sensitivity and resolution is continually encountered. System performance parameters relating to these requirements always depend on the signal-to-noise ratio of the total focal plane. Under optimum operating conditions for the best materials, the response is directly proportional to the total area of sensitive material on the focalplane Ap, whereas the noise varies as Ap1/2 thus system sensitivity varies as Ap1/2. However, resolution depends inversely on the dimensions of the sensitive elements. Thus, higher performance systems will require multielement focal planes of small, closely packed detectors.
© (1985) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. N. Gurnee, M. N. Gurnee, R. M. Broudy, R. M. Broudy, } "HgCdTe Focal Plane Development Concepts", Proc. SPIE 0570, Solid-State Imaging Arrays, (11 December 1985); doi: 10.1117/12.950324; https://doi.org/10.1117/12.950324


CCDs For IR Focal Plane Arrays
Proceedings of SPIE (December 10 1985)
Hybrid HgCdTe Arrays
Proceedings of SPIE (December 08 1983)
Source-Coupling For Hybrid Focal Planes
Proceedings of SPIE (December 28 1981)
Short Wavelength Infrared Hybrid Focal Plane Arrays
Proceedings of SPIE (November 29 1983)
Infrared focal planes-an evaluation
Proceedings of SPIE (May 06 1980)
Signal To Noise Ratio Dependence On Frame Time, Time Delay...
Proceedings of SPIE (February 17 1981)

Back to Top