11 December 1985 Improved Performance Characteristics For Indium Antimonide Photovoltaic Detector Arrays Using A FET-Switched Multiplexing Technique
Author Affiliations +
Performance characteristics of indium antimonide (InSb) linear infrared (1-5 micrometer) hybrid focal plane assemblies operating in a capacitive-discharge mode (CDM) which use a FET-switched multiplexer are discussed. Specific improvements in each of the two major components of these assemblies have demonstrated increased feasibility for use in high background environments. It is the objective of this paper to detail these improvements and discuss certain additional performance parameters. Previous papers dealt specifically with low background applications using this technique. Emphasis is therefore placed on the characteristics considered significant to the high background, tactical environment. Recent testing of hybrid assemblies using a newly modified Reticon FET-switched multiplexer chip indicate several distinct improvements over the previous version. These include a signal transfer function increase of 25%, a pixel readout rate exceeding 1 megahertz, and a reduction of the kTC component of read noise. The latter resulted in a 13% decrease in the total pixel read noise. These results were accomplished by a general reduction of video line capacitance. Incorporating the detector reset function on the multiplexer chip, thus eliminating the parasitic capacitance of the external MOSFET switch, was the primary factor facilitating the improvement. In addition, a metal bias plate structure has been added to the detector array. This functions to control surface leakage current at large reverse biases. It simultaneously reduces the dark current density and its associated shot noise. This has made it possible to measure maximum integration times of 430 milliseconds at 77 K, an increase of 38% over the previous standard. Large reverse biases are Bow practical and allow extension of the usable charge storage capacity to more than 1.2x108 electrons per storage well.
© (1985) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Curtiss A. Niblack, Curtiss A. Niblack, } "Improved Performance Characteristics For Indium Antimonide Photovoltaic Detector Arrays Using A FET-Switched Multiplexing Technique", Proc. SPIE 0570, Solid-State Imaging Arrays, (11 December 1985); doi: 10.1117/12.950325; https://doi.org/10.1117/12.950325


Quantum imaging for underwater arctic navigation
Proceedings of SPIE (May 01 2017)
Integrating 128 Element InSb Array: Recent Results
Proceedings of SPIE (November 23 1982)
InAsSb Hybrid Imager Evaluation
Proceedings of SPIE (May 07 1980)
58 x 62 Si As IBC detector arrays on PMOS...
Proceedings of SPIE (October 20 1993)
Performance Predictions Of InSb Switched Fet Hybrid Arrays
Proceedings of SPIE (October 13 1986)
Digital Imaging For Radiation Therapy Verification
Proceedings of SPIE (November 04 1981)

Back to Top