20 August 1986 Final Update On The "Bend-And-Polish" Project
Author Affiliations +
A 2-meter diameter off-axis parabola has been produced using the stressed mirror polishing technique. Surface accuracy obtained was better than 0.25μm (rms), somewhat short of the intended goal. Further improvement is limited by mechanical factors. Results are presented. No further work is planned. Some of the equipment will be loaned to the fabricator of mirrors for the Keck Ten-Meter Telescope.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
L. D. Barr, L. D. Barr, J. H. Richardson, J. H. Richardson, K-L Shu, K-L Shu, } "Final Update On The "Bend-And-Polish" Project", Proc. SPIE 0628, Advanced Technology Optical Telescopes III, (20 August 1986); doi: 10.1117/12.963579; https://doi.org/10.1117/12.963579


Polishing And Aspherizing A 1.8-m f/2.7 Paraboloid
Proceedings of SPIE (January 28 1989)
Technologies In Aspherisation
Proceedings of SPIE (January 15 1989)
NOAO testing procedures for large optics
Proceedings of SPIE (March 25 1992)
Steps Towards Large Replicated Mirrors
Proceedings of SPIE (August 19 1986)
Bend-And-Polish Fabrication Techniques
Proceedings of SPIE (October 21 1985)
Generation Of Off-Axis Aspherics
Proceedings of SPIE (November 03 1982)

Back to Top