3 November 1986 In Process Measurement Of Radii Of Curvature On Micromachined Spherical Zones
Author Affiliations +
Proceedings Volume 0645, Optical Manufacturing, Testing and Aspheric Optics; (1986) https://doi.org/10.1117/12.964482
Event: 1986 Technical Symposium Southeast, 1986, Orlando, United States
Abstract
Measurement of radii of curvature (cv, cc) in the 'ange 1 to 30 m is hardly possible using available metrology equipment. An ancient method' of long radius measurement is reevaluated and adapted to in situ measurments on spherical generators . Finding the auto-collimation position is eased by strioscopic interferometry which at the same time allows Foucault- and interferometric surface testing. Radii typical in high power lasers from 1 - 30 m are subject to this type of radius measurement. The inaccuracy is in the order of dR/R = 0,05 %.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. Langenbeck, P. Langenbeck, } "In Process Measurement Of Radii Of Curvature On Micromachined Spherical Zones", Proc. SPIE 0645, Optical Manufacturing, Testing and Aspheric Optics, (3 November 1986); doi: 10.1117/12.964482; https://doi.org/10.1117/12.964482
PROCEEDINGS
4 PAGES


SHARE
RELATED CONTENT

Design and construction of a focal plane slicing mirror
Proceedings of SPIE (July 18 2008)
LISA pathfinder optical interferometry
Proceedings of SPIE (September 29 2004)
Scan Interferometer
Proceedings of SPIE (January 16 1989)
Stylus profilometry of large optics
Proceedings of SPIE (November 01 1990)
Interferometric metrology of conformal domes
Proceedings of SPIE (July 26 1999)

Back to Top