13 August 1986 High speed semiconductor lasers: theory and applications in photonic measurements
Author Affiliations +
Proceedings Volume 0648, Photonics: High Bandwidth Analog Applications; (1986) https://doi.org/10.1117/12.964532
Event: SPIE Institutes for Advanced Optical Technologies, 1988, Hamburg, Germany
A major impetus for the development of high performance solid state optical sources is the advance in optical fiber technology. Present day off-the-shelf optical fibers offer a loss of below 1 db/km, and bandwidths from (depending on the fiber type) 1 GHz-km to 10 GHz-km. Two main categories of fibers exist today: those that operate at 0.8 um, and at 1.3 um - 1.5 um optical wavelength. In each of the above categories, there are two fiber types - multimode and single mode. By far the most common optical fibers produced today are of two types: multimode fiber at 0.8 um, and single mode fiber at 1.3 um. Single mode fibers in general offer much higher bandwidth than multimode fiber. However, single mode fibers at 0.8 um are not produced in any substantial quantity and, in this author's opinion, with unsatisfactory performances in terms of backscattering loss. Hence, for the majority of applications in photonic measurements where streak cameras are used for data recording, 0.8 um multimode fiber systems appear to be the nominal transmission medium in the near future.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kam Y. Lau, Kam Y. Lau, } "High speed semiconductor lasers: theory and applications in photonic measurements", Proc. SPIE 0648, Photonics: High Bandwidth Analog Applications, (13 August 1986); doi: 10.1117/12.964532; https://doi.org/10.1117/12.964532

Back to Top