21 October 1986 Laser Cladding Of Cobalt-Base Powder On Stainless And Construction Steels
Author Affiliations +
Proceedings Volume 0650, High Power Lasers and Their Industrial Applications; (1986) https://doi.org/10.1117/12.938106
Event: 1986 International Symposium/Innsbruck, 1986, Innsbruck, Austria
Abstract
Laser cladding tests have been performed using a high power CO2, laser realized by CISE. In this process a high power beam is focussed on the surface of the substrate to be cladded. The beam produces a surface melting while a powder flow, carried by an inert gas, is blown into the melt pool. The advantages of the laser cladding compared to the conventional cladding processes are the following: - effective metallurgical bonding between the cladded layer and the substrate with a very low heat transferred to the workpiece; - high hardness of the cladded layer with a low dilution without cracks or porosities; - less pre and post-process operations. Example of laser cladding tests of cobalt base powder on stainless austenitic and martensitic steels and on construction steels are reported.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
W Cerri, W Cerri, V Donati, V Donati, O Fiorini, O Fiorini, C A Be, C A Be, } "Laser Cladding Of Cobalt-Base Powder On Stainless And Construction Steels", Proc. SPIE 0650, High Power Lasers and Their Industrial Applications, (21 October 1986); doi: 10.1117/12.938106; https://doi.org/10.1117/12.938106
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT


Back to Top