24 September 1986 Electrochromic Devices For Transmissive And Reflective Light Control
Author Affiliations +
Fundamental properties of the transmissive electrochromic device are described. The device comprises of a semi-solid electrolyte and a WO3 film sandwiched by a pair of transparent electroconductive sheet glasses. The transmittance of the device can be arbitrarily controlled within the range from 80% to 10%. The response time was found to be greatly depended on the size. The life time for the repetitive operations is more than 105 cycles. Fairly good durability against the outdoor conditions has been clarified. This device is capable of controlling reflectance of mirror when a reflective layer is coated on the either surface of outer glass. Outline of this reflective device is also described. The reflectance of the mirror of the size of 25cm x 6.5cm can be changed from 72% to 20% within 4sec at 1.5VDC. This device is suitable for anti-dazzling mirror of motor cars.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tadatoshi Kamimori, Tadatoshi Kamimori, Junichi Nagai, Junichi Nagai, Mamoru Mizuhashi, Mamoru Mizuhashi, "Electrochromic Devices For Transmissive And Reflective Light Control", Proc. SPIE 0653, Optical Materials Technology for Energy Efficiency and Solar Energy Conversion V, (24 September 1986); doi: 10.1117/12.938301; https://doi.org/10.1117/12.938301


Electrochromism Of Nickel-Based Sputtered Coatings
Proceedings of SPIE (September 23 1986)
High Contrast Electrochromic Tungsten Oxide Layers
Proceedings of SPIE (September 23 1986)
Transmissive E.lectrochromic Device
Proceedings of SPIE (December 01 1985)
Electrochromic Coatings For "Smart Windows"
Proceedings of SPIE (November 01 1984)
Electrochromic Properties Of Phosphotungstic Acid
Proceedings of SPIE (December 11 1989)
Cation intercalation in electrochromic NiOx films
Proceedings of SPIE (November 30 1991)

Back to Top