22 November 1986 Pyroelectric PVDF Controlled By Poling Improved Conditions
Author Affiliations +
Proceedings Volume 0659, Materials Technologies for Infrared Detectors; (1986) https://doi.org/10.1117/12.938558
Event: 1986 International Symposium/Innsbruck, 1986, Innsbruck, Austria
The standard poling procedure of a PVDF biaxially oriented film implies for simplicity of the equipment, the combined application of a DC electric field between the metallic electrodes deposited on both faces on the film, and a temperature ranging between the ambiant and the Curie point. So far, no scientific approach has been advanced to justify the values of the poling parameters : the applied voltage Vp, the temperature Tp, the duration t , usually adopted during the poling. The interdependence between the three parameters effEcts should be considered, as the maximum dipole orientation is achieved for an applied voltage value depending on the other two parameters. (1000 V for 90°C and 30 mn, whereas 1200 V for 70°C and 30 mn in our experiments).
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A Bunuel, D Esteve, J Farre, V V Pham, and J J Simonne "Pyroelectric PVDF Controlled By Poling Improved Conditions", Proc. SPIE 0659, Materials Technologies for Infrared Detectors, (22 November 1986); doi: 10.1117/12.938558; https://doi.org/10.1117/12.938558

Back to Top