Paper
3 June 1987 Comparison Of Two BRDF Measuring Systems
John G Kepros, Leo Davis
Author Affiliations +
Abstract
The comparison of BRDF (Bi-directional Reflectance Distribution Function) measurements made on the same system but at different times or days is a method of determining potential sample or system change. If the measurements lie within the acceptable error region of the system, confidence is gained in the results after repeated testing. However, when a system is replaced by a new, improved facility, both the time delay associated with the change and the different character of the systems may preclude easy, direct comparison. When the test pieces are carefully stored to minimize contamination and when both systems use a common standard, similar results can be anticipated in a comparison test. Such comparisons are needed and can be made. Two mirrors were tested, using an in-house designed and fabricated BRDF measuring system. The mirrors were immediately replaced in their protective boxes and stored. A comparison was made between the mirror test results and tests from similar mirrors. No abnormal results were found. The initial system was subsequently replaced by a new system, the LMSC BOSM (Bi-directional Optical Scattering Measurement) Facility. After installation and evaluation, the two reserved mirrors were retested on the new system and comparison between old and new data is shown.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John G Kepros and Leo Davis "Comparison Of Two BRDF Measuring Systems", Proc. SPIE 0675, Stray Radiation V, (3 June 1987); https://doi.org/10.1117/12.939479
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Particles

Bidirectional reflectance transmission function

Light scattering

Mirrors

Image analysis

Photography

Scanning electron microscopy

Back to Top