19 December 1986 Viscoelastic Control Layers For Solid-State Light Valves
Author Affiliations +
The deformation behavior of thin viscoelastic control layers for eventual use in Schlieren light valves is investigated theoretically as well as experimentally. Electrical excitation and viscoelastic properties of the control layer are incorporated in a differential equation which is solved analytically. Based on a quantitative evaluation of this solution, the time behavior and the spatial-frequency response of the control-layer deformation are described and the influence of several parameters is considered. Stability problems and alternative geometries are discussed in view of the analytical results. Interferometric and diffraction measurements of the control-layer deformation confirm the analytical results at least in principle. Maximum deformation amplitudes of approximately 0.14m and time constants on the order of a few ms are obtained in agreement with the theory. It is concluded that viscoelastic control layers are suitable for light-valve projection if the viscoelastic material, the control-layer geometry, the electrical addressing, and the optical system are optimized.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. Tepe, R. Tepe, R. Gerhard-Multhaupt, R. Gerhard-Multhaupt, W. Brinker, W. Brinker, } "Viscoelastic Control Layers For Solid-State Light Valves", Proc. SPIE 0684, Liquid Crystals and Spatial Light Modulator Materials, (19 December 1986); doi: 10.1117/12.936475; https://doi.org/10.1117/12.936475

Back to Top