14 January 1987 Interlinked Tracking Servo Technology
Author Affiliations +
Abstract
The well known push-pull method has a problem in tracking offset caused by deviation of the beam axis and disk inclination. The tracking offset degrades the tracking servo performance and the track following range is conventionally restricted to about ±50pm. To solve this problem and enlarge the track following range, we have developed a new tracking servo technology which uses two actuators interlinked by servos. This method completely eliminates the deviation of the beam axis and enables a track following range of ±400 μm.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Arai, S. Arai, T. Iwamoto, T. Iwamoto, K. Hamada, K. Hamada, K. Ogawa, K. Ogawa, } "Interlinked Tracking Servo Technology", Proc. SPIE 0695, Optical Mass Data Storage II, (14 January 1987); doi: 10.1117/12.936829; https://doi.org/10.1117/12.936829
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Two-Beam Optical Head
Proceedings of SPIE (January 13 1987)
Measuring Method Of Optical Disk Mechanical Characteristics
Proceedings of SPIE (January 13 1987)
Tracking Servo For Small Size Optical Disk System.
Proceedings of SPIE (January 13 1987)
Compact-Size Optical Head For Magneto-Optical Disk Drive
Proceedings of SPIE (January 13 1987)

Back to Top