28 April 1987 Embedded Optical Fiber Strain Sensor For Composite Structure Applications
Author Affiliations +
Proceedings Volume 0718, Fiber Optic and Laser Sensors IV; (1987) https://doi.org/10.1117/12.937526
Event: Cambridge Symposium-Fiber/LASE '86, 1986, Cambridge, MA, United States
Abstract
Optical fibers have been embedded in polymer-matrix fiber reinforced composite materials during fabrication. Subsequent testing has shown that optical coupling to, and transmission through, the embedded fibers can be accomplished. A radio frequency interferometric sensor instrument has been built to detect small changes in the optical fiber path length. Elongations smaller than 1 mm over a 1 m path, corresponding to a distributed strain threshold below 1000 μin./in., have been detected. The instrument has been used to demonstrate strain measurement with embedded fibers in graphite/epoxy test specimens. These measurements are compared with electrical resistance strain gage readings.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
W.Jeffrey Rowe, W.Jeffrey Rowe, E O Rausch, E O Rausch, P D Dean, P D Dean, } "Embedded Optical Fiber Strain Sensor For Composite Structure Applications", Proc. SPIE 0718, Fiber Optic and Laser Sensors IV, (28 April 1987); doi: 10.1117/12.937526; https://doi.org/10.1117/12.937526
PROCEEDINGS
8 PAGES


SHARE
Back to Top