25 February 1987 Power And Propulsion Systems For Mobile Robotic Applications
Author Affiliations +
Proceedings Volume 0727, Mobile Robots I; (1987) https://doi.org/10.1117/12.937779
Event: Cambridge Symposium_Intelligent Robotics Systems, 1986, Cambridge, MA, United States
Abstract
Choosing the best power and propulsion systems for mobile robotic land vehicle applications requires consideration of technologies. The electric power requirements for onboard electronic and auxiliary equipment include 110/220 volt 60 Hz ac power as well as low voltage dc power. Weight and power are saved by either direct dc power distribution, or high frequency (20 kHz) ac power distribution. Vehicle control functions are performed electronically but steering, braking and traction power may be distributed electrically, mechanically or by fluid (hydraulic) means. Electric drive is practical, even for small vehicles, provided that advanced electric motors are used. Such electric motors have demonstrated power densities of 3.1 kilowatts per kilogram with devices in the 15 kilowatt range. Electric motors have a lower torque, but higher power density as compared to hydraulic or mechanical transmission systems. Power density being comparable, electric drives were selected to best meet the other requirements for robotic vehicles. Two robotic vehicle propulsion system designs are described to illustrate the implementation of electric drive over a vehicle size range of 250-7500 kilograms.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David D. Wright, David D. Wright, } "Power And Propulsion Systems For Mobile Robotic Applications", Proc. SPIE 0727, Mobile Robots I, (25 February 1987); doi: 10.1117/12.937779; https://doi.org/10.1117/12.937779
PROCEEDINGS
7 PAGES


SHARE
Back to Top