In order to enable measurement by dynamic holography, it is necessary to reduce as much as possible the amplitude of the bending displacement of the large surface plate where the testing machine is placed. We produced a large surface plate supported by an air mount. Then we forecast the natural frequency and amplitude of the surface plate, and compared them with the results of our experiment. In addition, after the dynamic dampers which had been developed to reduce the amplitude were attached to the surface plate, we re-forecast the amplitude and compared it with the results of our experiment. As a result, we recognized that the dynamic dampers were effective in reducing the resonance amplitude of the surface plate. In the experiment, the amplitude was reduced to 1/6.
|