Paper
20 April 1987 System Tradeoffs in Optical PPM Communications with Diode Combining
R. M. Gagliardi
Author Affiliations +
Proceedings Volume 0740, Laser Diode Optics; (1987) https://doi.org/10.1117/12.939735
Event: OE LASE'87 and EO Imaging Symposium, 1987, Los Angeles, CA, United States
Abstract
Optical power combining with laser diodes is receiving considerable attention. The objective is to noncoherently combine the diffraction limited beams of N diodes into a single beam, thereby increasing the field intensity by N. To accomplish this it is necessary to operate the diodes at different wavelengths in order to achieve the required combining. A question then arises as to the most efficient way to encode the diodes for maximum digital performance. In this paper, three different system architectures are considered, with combining achieved by dichroic mirrors operating in conjunction with a pulse position modulated (PPM) format. The basic criterion is maximization of data rate with increasing number of diodes, while maintaining a fixed decoding bit error probability. The three systems are: 1) power combining into a single pulse, followed by PPM encoding; 2) parallel channels, in which each diode is separately PPM encoded; and 3) color-coding, in which diodes are encoded over a common wavelength-time slot alphabet. All systems use beam combining, but the latter two require wavelength splitting as well. Data rate performance is evaluated as a function of the number of diodes, mirror combining losses, PPM alphabet size, and the operating optical SNR.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. M. Gagliardi "System Tradeoffs in Optical PPM Communications with Diode Combining", Proc. SPIE 0740, Laser Diode Optics, (20 April 1987); https://doi.org/10.1117/12.939735
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diodes

Mirrors

Semiconductor lasers

Receivers

Diffraction

Signal to noise ratio

Pulsed laser operation

Back to Top