20 April 1987 Reduction Of Instrument Signature In Near Angle Scatter Measurements
Author Affiliations +
Proceedings Volume 0749, Metrology: Figure and Finish; (1987) https://doi.org/10.1117/12.939840
Event: OE LASE'87 and EO Imaging Symposium, 1987, Los Angeles, CA, United States
Abstract
The light scattered by optical components is a sensitive indication of component surface and bulk quality. Angular scatter measurement as an indication of component quality has been reported by a number of investigators since the early 1970's [1-4]. Most of these measurements are limited to angles outside a near angle cone centered about the reflected (or transmitted) specular beam. Measurements are more difficult at near angles because the instrument (scatterometer) source optics create scatter near the specular input beam that is superimposed on the sample scatter. This source scatter is often referred to as instrument signature and its presence must be considered when near angle scatter measurements are taken. The minimum measurable angle depends on the difference between instrument signature and sample scatter. Usually these two are of comparable size somewhere in the region of 0.50 to 50 from the specular beam. Inside this limit, sample scatter is referred to as near, small or low angle scatter. Outside this limit, sample scatter is referred to as far, large or high angle scatter. Because the scattered light density increases rapidly as the specular beam is approached, reduction of near angle scatter is a design concern for many modern optical systems. At least four investigators have reported scatter measurements in the near angle region [5-8], using various techniques to reduce or account for instrument signature.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John C. Stover, Kyle A. Klicker, Daniel R. Cheever, and Fredrick M. Cady "Reduction Of Instrument Signature In Near Angle Scatter Measurements", Proc. SPIE 0749, Metrology: Figure and Finish, (20 April 1987); doi: 10.1117/12.939840; https://doi.org/10.1117/12.939840
PROCEEDINGS
8 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Stray light analysis of the Lyman FUSE fine error sensor
Proceedings of SPIE (November 10 1996)
Stray Light Problems, Concepts, And Tools
Proceedings of SPIE (June 02 1987)
A Small-Angle Scatterometer
Proceedings of SPIE (April 04 1989)
Current Technology Of Stray Light
Proceedings of SPIE (June 02 1987)

Back to Top