22 September 1987 Invited Paper Laser Systems To Solve Manufacturing Problems
Author Affiliations +
Proceedings Volume 0801, High Power Lasers: Sources, Laser-Material Interactions, High Excitations, and Fast Dynamics; (1987) https://doi.org/10.1117/12.941267
Event: Fourth International Symposium on Optical and Optoelectronic Applied Sciences and Engineering, 1987, The Hague, Netherlands
Abstract
Twenty years ago the first laser system was installed to solve a manufacturing problem, the drilling of precise holes in diamonds to produce a wire drawing die. The early system installations either for laser technology or end use reasons, were categorized as specials, that is units which differed in specification and performance from previous units. During the first ten years it was quite common for industrial applications to be processed by a customized unit. As the number of common applications grew, and as the specific application needs began to dictate a uniform approach to successful resolution, the number of customized systems began to decline. Coupled with this was the system suppliers' efforts to standardize product design to reduce manufacturing complexity and cost. Today the users of industrial laser systems have a choice when considering the laser in a manufacturing operation. within certain categories such as sheet metal cutting, turbine blade drilling, and ceramic scribing users can choose from a representative number of stan-dard systems. For other applications such as marking, hermetic sealing, and transmission component welding suppliers can provide variations of designs which are known as semi-standards. The third and last category, specials, makes up a reasonable share of the units currently being installed in production applications. These specials are the subject of this paper. Identification of a specific manufacturing problem and exploration of the reasons why a laser could be cost effective are presented. Illustrations of a number of these manufac-turing problems will show how a custom laser design provided a practical, satisfactory, solution. The novel system concepts employed to effect the solution will be discussed. Applications selected include: oven liner cutting, transmission gear welding, exhaust pipe cutting, and aircraft engine part processing.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David A. Belforte, David A. Belforte, } "Invited Paper Laser Systems To Solve Manufacturing Problems", Proc. SPIE 0801, High Power Lasers: Sources, Laser-Material Interactions, High Excitations, and Fast Dynamics, (22 September 1987); doi: 10.1117/12.941267; https://doi.org/10.1117/12.941267
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Teradiode's high brightness semiconductor lasers
Proceedings of SPIE (April 21 2016)
Industrial Applications For High-Power Lasers - An Overview
Proceedings of SPIE (September 14 1981)
Lasers in the automobile industry
Proceedings of SPIE (April 07 1996)
Economic Justification Of Industrial Laser Applications
Proceedings of SPIE (September 29 1985)
Latest developments in laser manufacturing
Proceedings of SPIE (September 06 1994)
Job Shop Market
Proceedings of SPIE (March 15 1989)

Back to Top