1 January 1987 A Design Procedure To Tune The Dynamic Stiffness Of An Externally Pressurized Gas Bearing
Author Affiliations +
Proceedings Volume 0802, In-Process Optical Metrology for Precision Machining; (1987) https://doi.org/10.1117/12.967100
Event: Fourth International Symposium on Optical and Optoelectronic Applied Sciences and Engineering, 1987, The Hague, Netherlands
Abstract
A design procedure for flat, circular thrust bearings is presented here. The procedure is based upon a new dynamic model of the bearing and the principle of tuning the bearing's dynamic stiffness to optimize the dynamic performance of the overall, machine-bearing system. The design procedure is iterative so as to satisfy a number of different design constraints and is illustrated in an example problem.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. W. Roblee, J. W. Roblee, } "A Design Procedure To Tune The Dynamic Stiffness Of An Externally Pressurized Gas Bearing", Proc. SPIE 0802, In-Process Optical Metrology for Precision Machining, (1 January 1987); doi: 10.1117/12.967100; https://doi.org/10.1117/12.967100
PROCEEDINGS
11 PAGES


SHARE
Back to Top