11 January 1987 A Practical Method Of Machine Tool Condition Monitoring By Analysis Of Component Surface Finish Data
Author Affiliations +
Proceedings Volume 0803, Micromachining of Elements with Optical and Other Submicrometer Dimensional and Surface Specifications; (1987) https://doi.org/10.1117/12.941282
Event: Fourth International Symposium on Optical and Optoelectronic Applied Sciences and Engineering, 1987, The Hague, Netherlands
Abstract
Random process analysis of component surface finish data is used to establish the 'fingerprint' of the machine tool condition when applied to a particular machining operation. Vibrations occurring during the machining process can be determined and the nature of the vibration isolated. It will be shown that for a turning operation it is possible to distinguish among types of error, such as, vibrations and errors causing radial movement of the cutting tool, variation in feed rate, vertical vibration of the cutter or component, or worn bearings. Existing methods used for condition monitoring involve the use of expensive vibration analysers with skilled personnel to assess the results and make a judgement of the machine tool capability. This means that a machine must be taken off line to be checked and hence cannot be continually assessed. Random process analysis of the surface texture produced on the component permits condition monitoring and assessment of machine capability to be made during production runs. The control parameters are not based on an arbitary judgement but on maintaining an acceptable quality of component according to its specification. This method effectively closes the control loop closely around the component. It modifies the control parameters to meet the required precision for the component and assesses if the machine capability is acceptable.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. T. Hingle, "A Practical Method Of Machine Tool Condition Monitoring By Analysis Of Component Surface Finish Data", Proc. SPIE 0803, Micromachining of Elements with Optical and Other Submicrometer Dimensional and Surface Specifications, (11 January 1987); doi: 10.1117/12.941282; https://doi.org/10.1117/12.941282
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

The Accuracy Of Air Bearing Systems
Proceedings of SPIE (January 11 1987)
"A Computer Controlled Diamond Tool Flycutter"
Proceedings of SPIE (December 09 1983)

Back to Top