Translator Disclaimer
4 February 1988 Nodal And Focal Surface Mapping Using A Linear Array
Author Affiliations +
Abstract
As a basis for calculating lens correction curves, the front and rear focal and nodal surfaces are mapped for lenses used in film analysis. The image of a collimated source is read as a function of incident angle using a linear CCD. The front nodal point is used as a camera position and the measured angular variation provides a fine correction td the object distance. The resulting corrections allow accurate spatial locations to be calculated for target objects imaged at the film plane.
© (1988) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Judson B. Estes, David G. Labick, Robert M. Williamson, and William MacIntyre "Nodal And Focal Surface Mapping Using A Linear Array", Proc. SPIE 0832, High Speed Photography, Videography, and Photonics V, (4 February 1988); https://doi.org/10.1117/12.942201
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

High-speed imaging with a frame-transfer CCD
Proceedings of SPIE (December 31 1992)
Long term flat field behavior on LLNL streak cameras ...
Proceedings of SPIE (December 31 1990)
Gladiolus-1 high-speed camera modification
Proceedings of SPIE (December 31 1992)
Moving Image Analysis System
Proceedings of SPIE (January 31 1989)

Back to Top