1 January 1987 AVIRIS Onboard Data Handling And Control
Author Affiliations +
The timing and flow of detector and ancillary data for the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) are controlled within the instrument by its digital electronics assembly. In addition to providing detector and signal chain timing, the digital electronics receives, formats, and rate-buffers digitized science data; collects and formats ancillary (calibration and engineering) data; and merges both into a single tape record. Overall AVIRIS data handling is effected by a combination of dedicated digital electronics to control instrument timing, image data flow, and data rate buffering and a microcomputer programmed to handle real-time control of instrument mechanisms and the coordinated preparation of ancillary data.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ronald E. Steinkraus, Ronald E. Steinkraus, Roger W. Hickok, Roger W. Hickok, } "AVIRIS Onboard Data Handling And Control", Proc. SPIE 0834, Imaging Spectroscopy II, (1 January 1987); doi: 10.1117/12.942286; https://doi.org/10.1117/12.942286


AVIRIS Ground Data-Processing System
Proceedings of SPIE (December 31 1986)
Fabrication and calibration of FORTIS
Proceedings of SPIE (September 13 2011)
Developing a new data acquisition devices for COMICS
Proceedings of SPIE (March 06 2003)
HySens-DAIS/ROSIS Imaging Spectrometers at DLR
Proceedings of SPIE (January 22 2002)

Back to Top