Paper
14 April 1988 Fiber To Fiber Connections For Medium And High Power Lasers
G. Margheri, V. Russo
Author Affiliations +
Proceedings Volume 0862, Optical Interconnections; (1988) https://doi.org/10.1117/12.943476
Event: 1987 Symposium on the Technologies for Optoelectronics, 1987, Cannes, France
Abstract
The connection of two optical fibers is a problem of great interest in all the application areas of fiber optic laser systems.It has been widely investigated in the field of optical communications,where low power laser diodes are usually employed.Less attention has been devoted so far to the problem of fiber interconnections with medium and high power laser sources,which are used for instance in the industrial and medical fields. We have analysed the possibility of using lens ended fibers to improve the performances of conventional connections,through the relaxation of the positional tolerances.Two types of connections (a) bulb ended fiber to flat ended fiber ; (b) bulb ended fiber to bulb ended fiber are considered,in the case of eaual fibers as well as in the case of fibers with equal core diameter and different N.A. These new connections have been experimentally tested,and their performances compared with usual flat-flat connection.It has been shown that bulb ended fiber connections constitute an effective improvement with respect to the conventional ones.
© (1988) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. Margheri and V. Russo "Fiber To Fiber Connections For Medium And High Power Lasers", Proc. SPIE 0862, Optical Interconnections, (14 April 1988); https://doi.org/10.1117/12.943476
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Microlens

Fiber lasers

Tolerancing

Optical interconnects

Laser applications

High power lasers

Semiconductor lasers

RELATED CONTENT

High-power laser/optical-fiber-coupling device
Proceedings of SPIE (August 01 1991)
Beam shaping technology for laser diode arrays
Proceedings of SPIE (October 24 2002)
Laser splicing of end caps process requirements in high...
Proceedings of SPIE (February 24 2009)

Back to Top