13 April 1988 Ionospheric And Atmospheric Remote Sensing Using Passive Sensors
Author Affiliations +
Proceedings Volume 0868, Optoelectronic Technologies for Remote Sensing from Space; (1988) https://doi.org/10.1117/12.943593
Event: 1987 Symposium on the Technologies for Optoelectronics, 1987, Cannes, France
Abstract
Knowledge of the instantaneous state of the ionosphere can facilitate many components of C3I systems. Traditionally, ionospheric measurements have been performed using Langmuir probes, ion mass spectrometers, radars and ionosondes. The first two sample the ionosphere in situ, along the rocket or satellite trajectories. Besides being an active probing method, ground-based radio observa-tions are limited to a geographically fixed area surrounding the measurement site. In recent years it has been shown that ionospheric density distributions can be obtained by the remote sensing of selected Extreme Ultraviolet (EUV) emissions. The sensors for these measurements employ space-based passive detection techniques. The spectral region below 2000 A has successfully been used to both probe the upper atmosphere and image the aurora, even under fully sunlit conditions. The EUV measurements can also be used to infer the energy of precipitating electrons in aurorae. In this paper recent work in these areas will be reviewed. Requirements for future instrumentations will be discussed.
© (1988) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Supriya Chakrabarti, Richard Link, G. Randall Gladstone, "Ionospheric And Atmospheric Remote Sensing Using Passive Sensors", Proc. SPIE 0868, Optoelectronic Technologies for Remote Sensing from Space, (13 April 1988); doi: 10.1117/12.943593; https://doi.org/10.1117/12.943593
PROCEEDINGS
7 PAGES


SHARE
Back to Top