Translator Disclaimer
9 June 1988 Interface Of Optical Design Programs To CAD/CAE/CAM Software
Author Affiliations +
Proceedings Volume 0892, Simulation and Modeling of Optical Systems; (1988)
Event: 1988 Los Angeles Symposium: O-E/LASE '88, 1988, Los Angeles, CA, United States
CAD/CAM systems permit the manufacture of real physical parts on a milling, or other shop, machine which has received its instructions from the design system. However, a persistent problem has been the lack of a link between the optical CAD software and the mechanical CAD software. A past paperl described software which bridges this gap by producing an Interactive Graphics Exchange Standard (IGES) file from the neutral plot files of the optical model. This IGES file can then be directly read into the mechanical drafting and design programs, ANVIL and GEOMOD. Although the latest enhancements to this older interface will be addressed, the main thrust of the paper is the description of three completely new capabilities: 1) the ability to directly read NASTRAN-generated strain data for optical surfaces into the optical design program CODE-V, 2) the direct passage of a standard lens prescription in CODE-V to the program APART for stray light analysis, and 3) the entry of mechanical drafting data directly into APART via IGES files. This last interface is particularly exciting because it allows, for the first time, completely graphical entry of structural data into an optical analysis program. A description of the typical procedures used to accomplish the transfer of data is provided along with several examples. Plans are presented to use these new software links to achieve paperless manufacture of opto-mechanical systems. Since the current algorithms have been designed with an eye on eventual improvements, an assessment of current limitations and future enhancements is also included.
© (1988) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Timothy D Wise "Interface Of Optical Design Programs To CAD/CAE/CAM Software", Proc. SPIE 0892, Simulation and Modeling of Optical Systems, (9 June 1988);


Back to Top