Translator Disclaimer
11 October 1988 Improvements In The Design And Manufacture Of Infrared Optical Systems
Author Affiliations +
Proceedings Volume 0916, Infrared Systems--Design and Testing; (1988) https://doi.org/10.1117/12.945554
Event: Sira/SPIE Infrared Meeting, 1988, London, United Kingdom
Abstract
The image quality of modern infrared systems has almost to be diffraction limited. Therefore high demands in lens design, choice of materials and the manufacture are required. Typical advances in lens design using full advantage of aspherics are shown. For the materials used homogeneity and birefringence have to be in certain limits and kept under control. Optical surfaces for the IR may be manufactured applying the classical polishing technique or by single point diamond turning, whereby diamond turning is used especially for the manufacture of aspherics. Imperfect surface structure will cause veiling glare and thus reduce image quality. Typical examples are shown.
© (1988) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Paul Kuttner "Improvements In The Design And Manufacture Of Infrared Optical Systems", Proc. SPIE 0916, Infrared Systems--Design and Testing, (11 October 1988); https://doi.org/10.1117/12.945554
PROCEEDINGS
11 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Diamond Turning At A Large Optical Manufacturer
Proceedings of SPIE (October 27 1978)
Infrared Optical Grade Germanium
Proceedings of SPIE (September 07 1979)
Precision molded aspherical lenses
Proceedings of SPIE (May 14 2007)

Back to Top