PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
One of the bottle necks of the defence industry is the fuze testing. This task must be performed twice for each fuze. It is a 100% test, since all the fuzes must pass two tests. The arming test is performed at an high rotation speed, and it is necessary to guarantee that a minimum diameter is open. The non arming speed must guarantee that a too small aperture has not happened. The usual way to test the fuzes is the visual inspection by experienced operators. This method presents several problems and is always possible to have some faults. To solve this problem, it was developed a special purpose machine to perform this task in a completely automated way. The results of this development are presented in this paper. The optical system which incorporates a laser and the interface with the mechanics of the machine are analysed. The prototype is installed at INDEP and being used for the automatic testing of the fuzes. A description of the optical system and its characteristics are presented in detail.
Fernando D. Carvalho,F. Carvalho Rodrigues,Cassiano P. Pais, andRogerio Prina
"Automatic Machine For Spin Testing", Proc. SPIE 0952, Laser Technologies in Industry, (16 January 1988); https://doi.org/10.1117/12.968816
ACCESS THE FULL ARTICLE
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
Fernando D. Carvalho, F. Carvalho Rodrigues, Cassiano P. Pais, Rogerio Prina, "Automatic Machine For Spin Testing," Proc. SPIE 0952, Laser Technologies in Industry, (16 January 1988); https://doi.org/10.1117/12.968816