6 December 2016 A study of metal-dielectric mirrors technology with regard to the laser-induced damage threshold
Author Affiliations +
Abstract
Four sets of mirror samples with multilayer system SiO2/Ta2O5 on silver metal layer were manufactured using modified coating technology of the metal layer. Both BK7 and fused silica substrate materials were used. Laser-induced-damage-threshold of mirrors was tested using a laser apparatus working at 1030 nm wavelength, 3 ps pulse length at 1 kHz repetition rate and in 105- on - 1 test mode. The measured damage thresholds values at 45 deg incidence and Ppolarization were compared for different substrate materials and different technology of the metal layer preparation. Additionally four sets of samples with silver layer covered by SiO2 protecting monolayer were manufactured and tested for the comparison.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Václav Škoda, Václav Škoda, Jan Vanda, Jan Vanda, } "A study of metal-dielectric mirrors technology with regard to the laser-induced damage threshold", Proc. SPIE 10014, Laser-Induced Damage in Optical Materials 2016, 1001424 (6 December 2016); doi: 10.1117/12.2245191; https://doi.org/10.1117/12.2245191
PROCEEDINGS
5 PAGES


SHARE
RELATED CONTENT

A study of ps laser induced damage threshold in hybrid...
Proceedings of SPIE (October 30 2014)
Mixed metal dielectric pulse compression gratings
Proceedings of SPIE (November 29 2010)
Fabrication of SiO2 AgI SiO2 Ag hollow glass fiber for...
Proceedings of SPIE (February 20 2009)
Pulse compression gratings for the PETAL project a review...
Proceedings of SPIE (January 06 2009)

Back to Top