You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
31 October 2016Temporal speckle method for measuring three-dimensional surface of large-sized rough glass
To provide accurate three-dimensional (3-D) data for production and processing, 3-D surface measurement is always an essential step to the production of glass. Profilometry and Interferometry are traditional measurement apparatus, referring to different procedures. Although more precise, Interferometry cannot be used in milling procedure, owing to the scattering property of rough glass. While as a widely used Profilometry, Coordinate Measuring Machine (CMM) employs a probe for measuring by contacting surface directly. It should be noted that such a time-consuming machine is not practical for measuring large-sized rough glass, so a novel designed method called temporal speckle is introduced to a non-contact binocular 3-D measurement system for measuring. Specifically, N band-limited binary patterns are sequentially projected to rough glass from a pattern generation device, such patterns have been proved to depress scattering properties of rough surface. The whole binocular 3-D measurement system can finish a single measurement in one second with a standard deviation less than 73.44um. This system performs fast and accurate 3-D surface measurement for large-sized rough glass block.