24 November 2016 The study of fast measurement hexahedron verticality error by wavefront interferometer
Author Affiliations +
This paper proposes a method to measure hexahedron vertical error based on wavefront interferometer and collimator. The setup of the measurement system and measurement steps is described. Comparing the vertical error of the same hexahedral surface adjacent measured by coordinate measurement machine, the validity of the measurement method is verified. Then not only the verticality error, but also form and shape error data of the two measured surface can be derived. The verticality error of adjacent surface is measured by the combination measurement method. Then surface figure error data for the two surfaces is measured by wavefront interferometer. The form and shape error data of one surface relative to the other can be obtained by added the verticality error to the surface figure error. This is very important in the part's error correction machining process. The effectiveness of the processing method has been verified by experiment. This method can achieve high measurement accuracy of 0.5″ and can be extended to high-precision shape and position errors measurement for other polyhedral parts.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shijun Peng, Shijun Peng, Songtao Gao, Songtao Gao, Dongcheng Wu, Dongcheng Wu, Erlong Miao, Erlong Miao, } "The study of fast measurement hexahedron verticality error by wavefront interferometer", Proc. SPIE 10023, Optical Metrology and Inspection for Industrial Applications IV, 100230C (24 November 2016); doi: 10.1117/12.2246394; https://doi.org/10.1117/12.2246394

Back to Top