24 November 2016 Rail profile control using laser triangulation scanners
Author Affiliations +
Abstract
Rail track geometric parameters measurement requires knowledge of left and right rail head location in each section. First of all displacement in transverse plane of rail head point located at a distance of 14 mm below the running surface, must be controlled [1]. It is carried out by detecting of each rail profile using triangulation laser scanners. Optical image recognition is carried out successfully in the laboratory, approaches used for this purpose are widely known. However, laser scanners operation has several features on railways leading to necessity of traditional approaches adaptation for solving these particular problems. The most significant problem is images noisiness due to the solar flashes and the effect of "Moon path" on the smooth rail surface. Using of optical filters gives inadequate result, because scanner laser diodes radiation frequency varies with temperature changes that forbid the use of narrow-band filters. Consideration of these features requires additional constructive and algorithmic solutions, including involvement of information from other sensors of the system. The specific usage of optical scanners for rail profiles control is the subject of the paper.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Аlexandr M. Boronahin, Аlexandr M. Boronahin, Daniil Yu. Larionov, Daniil Yu. Larionov, Liudmila N. Podgornaya, Liudmila N. Podgornaya, Roman V. Shalymov, Roman V. Shalymov, Yuri V. Filatov, Yuri V. Filatov, Evgueny D. Bokhman, Evgueny D. Bokhman, } "Rail profile control using laser triangulation scanners", Proc. SPIE 10023, Optical Metrology and Inspection for Industrial Applications IV, 100231B (24 November 2016); doi: 10.1117/12.2245736; https://doi.org/10.1117/12.2245736
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT


Back to Top