24 November 2016 Development of an edge sensor based on polyview optics and laser triangulation principle
Author Affiliations +
Abstract
Common 2D laser line triangulation sensors allow a 2D profile measurement in a single line. To scan samples with great curved surfaces like edges, a single laser line triangulation sensor is insufficient. To measure the entire form of such an edge, it normally requires either multiple measurements of one single sensor or a multi sensor system. For this reason, we developed an edge measurement sensor based on an in-house designed polyview optics and the well-known laser triangulation principle. The new developed edge measurement sensor is capable of measuring the object over a 180 field of view (FOV). The configuration, the calibration process and the measurement results of this edge sensor will be discussed in this paper.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yinan Li, Yinan Li, Hagen Bossmeyer, Hagen Bossmeyer, Markus Kästner, Markus Kästner, Eduard Reithmeier, Eduard Reithmeier, } "Development of an edge sensor based on polyview optics and laser triangulation principle", Proc. SPIE 10023, Optical Metrology and Inspection for Industrial Applications IV, 100231E (24 November 2016); doi: 10.1117/12.2247007; https://doi.org/10.1117/12.2247007
PROCEEDINGS
6 PAGES


SHARE
Back to Top