You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
28 September 2016Selective laser melting of metal micropowders with short-pulse laser
Selective laser melting is a unique additive technique which can manufacture solid metal objects but it require expensive, high power lasers. The primary aim of this work was to check is it possible to carry out this process by using lower power and high energy pulse laser. The secondary goal was to examine the influence of main technological parameters of selective laser melting on the quality and the thickness of produced layer. The requirements of metal powder, which allowed to obtain a layer with microthickness, were developed.
B. Wałpuski
"Selective laser melting of metal micropowders with short-pulse laser", Proc. SPIE 10031, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2016, 100310M (28 September 2016); https://doi.org/10.1117/12.2249311
The alert did not successfully save. Please try again later.
B. Wałpuski, "Selective laser melting of metal micropowders with short-pulse laser," Proc. SPIE 10031, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2016, 100310M (28 September 2016); https://doi.org/10.1117/12.2249311