Paper
28 September 2016 The low coherence Fabry-Pérot interferometer with diamond and ZnO layers
D. Majchrowicz, W. Den, M. Hirsch
Author Affiliations +
Proceedings Volume 10031, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2016; 1003112 (2016) https://doi.org/10.1117/12.2249162
Event: Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2016, 2016, Wilga, Poland
Abstract
The authors present a fiber-optic Fabry-Pérot interferometer built with the application of diamond and zinc oxide (ZnO) thin layers. Thin ZnO films were deposited on the tip of a standard telecommunication single-mode optical fiber (SMF- 28) while the diamond layer was grown on the plate of silicon substrate. Investigated ZnO layers were fabricated by atomic layer deposition (ALD) and the diamond films were deposited using Microwave Plasma Enhanced Chemical Vapor Deposition (μPE CVD) system. Different thickness of layers was examined. The measurements were performed for the fiber-optic Fabry-Pérot interferometer working in the reflective mode. Spectra were registered for various thicknesses of ZnO layer and various length of the air cavity. As a light source, two superluminescent diodes (SLD) with central wavelength of 1300 nm and 1550 nm were used in measurement set-up.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D. Majchrowicz, W. Den, and M. Hirsch "The low coherence Fabry-Pérot interferometer with diamond and ZnO layers", Proc. SPIE 10031, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2016, 1003112 (28 September 2016); https://doi.org/10.1117/12.2249162
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Zinc oxide

Diamond

Interferometers

Fiber optics

Thin films

Visibility

Light sources

Back to Top