29 August 2016 Measurement method for video probe based on line-structured light
Author Affiliations +
Proceedings Volume 10033, Eighth International Conference on Digital Image Processing (ICDIP 2016); 100335I (2016) https://doi.org/10.1117/12.2244941
Event: Eighth International Conference on Digital Image Processing (ICDIP 2016), 2016, Chengu, China
Abstract
Considering the requirement of measurement for video probe, a method that uses line-structured laser to measure points, lines and surfaces of the object is presented. The line-structured light imaging model is built, where the linear laser is used as an auxiliary light source irradiating on the surface of the object. Compared to the object image, the proportional coefficient is calibrated with multiplying factor in different distance and laser line position. The geometry parameters are calculated based on the measurement platform. The experimental results show that the measuring error is less than 10%, and the method is suitable for the requirements of the video probe.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Min Yao, Min Yao, } "Measurement method for video probe based on line-structured light", Proc. SPIE 10033, Eighth International Conference on Digital Image Processing (ICDIP 2016), 100335I (29 August 2016); doi: 10.1117/12.2244941; https://doi.org/10.1117/12.2244941
PROCEEDINGS
5 PAGES


SHARE
RELATED CONTENT

Measuring bend losses in large-mode-area fibers
Proceedings of SPIE (March 03 2015)
Novel color measurement system
Proceedings of SPIE (September 12 2002)
Analysis of interferograms of a lens using a knife edge...
Proceedings of SPIE (November 02 2011)
Research on measurement method of LED optical parameters
Proceedings of SPIE (February 21 2008)

Back to Top