3 February 2017 Micro-incubator for bacterial biosensing applications
Author Affiliations +
Proceedings Volume 10036, Fourth Conference on Sensors, MEMS, and Electro-Optic Systems; 100360G (2017) https://doi.org/10.1117/12.2245443
Event: Fourth Conference on Sensors, MEMS and Electro-Optic Systems, 2016, Skukuza, Kruger National Park, South Africa
Abstract
The presence of Escherichia coli (E. coli ) is a commonly used indicator micro-organism to determine whether water is safe for human consumption.1 This paper discusses the design of a micro-incubator that can be applied to concentrate bacteria prior to environmental water quality screening tests. High sensitivity and rapid test time is essential and there is a great need for these tests to be implemented on-site without the use of a laboratory infrastructure. In the light of these requirements, a mobile micro-incubator was designed, manufactured and characterised. A polydimethylsiloxane (PDMS) receptacle has been designed to house the 1-5 ml cell culture sample.2 A nano-silver printed electronics micro-heater has been designed to incubate the bacterial sample, with an array of temperature sensors implemented to accurately measure the sample temperature at various locations in the cell culture well. The micro-incubator limits the incubation temperature range to 37±3 °C in order to ensure near optimal growth of the bacteria at all times.3 The incubation time is adjustable between 30 minutes and 9 hours with a maximum rise time of 15 minutes to reach the set-point temperature. The surface area of the printed nano silver heating element is 500 mm2. Electrical and COMSOL Multiphysics simulations are included in order to give insight on micro-incubator temperature control. The design and characterization of this micro-incubator allows for further research in biosensing applications.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Estine Clasen, Estine Clasen, Kevin Land, Kevin Land, Trudi-Heleen Joubert, Trudi-Heleen Joubert, } "Micro-incubator for bacterial biosensing applications", Proc. SPIE 10036, Fourth Conference on Sensors, MEMS, and Electro-Optic Systems, 100360G (3 February 2017); doi: 10.1117/12.2245443; https://doi.org/10.1117/12.2245443
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

Bending artificial muscle from nylon filaments
Proceedings of SPIE (April 15 2016)
Thermal heat-balance mode flow-to-frequency converter
Proceedings of SPIE (November 10 2016)
Inkjet-printed multi-parameter measuring sensor
Proceedings of SPIE (April 17 2017)
Nature of nonlinearity of I V characteristics in CdTe Cl...
Proceedings of SPIE (January 20 2004)
Fabrication of a high Tc superconducting bolometer
Proceedings of SPIE (October 01 1990)
Athermalization of a forward-looking infrared system
Proceedings of SPIE (September 28 1999)

Back to Top