17 February 2017 Accurate time-domain angular jitter measurements for a high-speed polygon scanner
Author Affiliations +
Abstract
Angles of polygon scanners have been measured by using rotary encoders, autocollimators or indexing tables. These methods produce precise angle values but require removal of polygon mirror from its motor. For resolving this inconvenience, we introduce a simple angle measurement method by measuring timing jitters of a scanned beam in the time-domain with a high-speed detector and a digitizer while a polygon scanner is rotating at its full speed. Our setup includes a 635 nm wavelength semiconductor laser, a high-speed photodiode, two lenses, and a high-speed digitizer. A polygon scanner with 12 facets were tested with a rotating frequency of near 350 Hz. To detect the signal of the photodiode, we used a high speed digitizer which has a sampling rate of 2Gs/s with 256MB on-board memory. We obtained repeated pulsed sequential photodiode signals for 12 mirror facets of the scanner. Angle variations and their jitters for 12 scanner mirror facets were successfully calculated from measured data. We have repeated same experiments with a photomultiplier tube and compared results with those measured by a photodiode.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Youn Young Ji, Byung Hwy So, Won Sang Hwang, Don Geun Kim, Jun Woo Kim, Dug Young Kim, "Accurate time-domain angular jitter measurements for a high-speed polygon scanner", Proc. SPIE 10070, Three-Dimensional and Multidimensional Microscopy: Image Acquisition and Processing XXIV, 1007010 (17 February 2017); doi: 10.1117/12.2253398; https://doi.org/10.1117/12.2253398
PROCEEDINGS
5 PAGES


SHARE
Back to Top