21 February 2017 Anisotropy imaging using polarization and angular multiplexing
Author Affiliations +
Proceedings Volume 10074, Quantitative Phase Imaging III; 100741P (2017) https://doi.org/10.1117/12.2251727
Event: SPIE BiOS, 2017, San Francisco, California, United States
Abstract
Phase contrast x-ray imaging techniques have shown the ability to overcome the weakness of the low sensitivity of conventional x-ray imaging. Among them, in-line phase contrast imaging, blessed with simplicity of arrangement, is deemed to be a promising technique in clinical application. To obtain quantitative information from in-line phase contrast images, numerous phase-retrieval techniques have been developed. The theories of these phase-retrieval techniques are mostly proposed on the basis of the ideal detector and the noise-free environment. However, in practice, both detector resolution and system noise would have impacts on the performance of these phase-retrieval methods. To assess the impacts of above-mentioned factors, we include the effects of Gaussian shaped detectors varying in the full width at half maximum (FWHM) and system noise at different levels into numerical simulations. The performance of the phase-retrieval methods under such conditions is evaluated by the root mean square error. The results demonstrate that an increase in the detector FWHM or noise level degrades the effect of phase retrieval, especially for objects in small size.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Aparna V., Niraj K. Soni, Vinu R. V., Rakesh Kumar Singh, "Anisotropy imaging using polarization and angular multiplexing", Proc. SPIE 10074, Quantitative Phase Imaging III, 100741P (21 February 2017); doi: 10.1117/12.2251727; https://doi.org/10.1117/12.2251727
PROCEEDINGS
7 PAGES


SHARE
Back to Top