22 February 2017 Scheimpflug multi-aperture Fourier ptychography: coherent computational microscope with gigapixels/s data acquisition rates using 3D printed components
Author Affiliations +
Abstract
Obtaining gigapixel images is a challenging task because of the aberrations present in a conventional optical system, small sensor sizes and limited data-capture rates of cameras. Multi-aperture Fourier ptychography (MAFP) was proposed recently by us to solve the issue of increasing the data acquisition bandwidth by parallelizing data capture using an array of lenses coupled with discrete detectors. We present an advanced MAFP system based on the Scheimpflug configuration to improve the MAFP system performance at high NAs. This system requires a complicated optical system due to the large number of degrees of freedom present in the system. Hence we developed a 3D-printed system which solves this issue and decreases the cost of the setup tremendously. In this manuscript we present the details of our 3D printed design and preliminary images obtained using this system.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pavan Chandra Konda, Pavan Chandra Konda, Jonathan M. Taylor, Jonathan M. Taylor, Andrew R. Harvey, Andrew R. Harvey, } "Scheimpflug multi-aperture Fourier ptychography: coherent computational microscope with gigapixels/s data acquisition rates using 3D printed components", Proc. SPIE 10076, High-Speed Biomedical Imaging and Spectroscopy: Toward Big Data Instrumentation and Management II, 100760R (22 February 2017); doi: 10.1117/12.2251884; https://doi.org/10.1117/12.2251884
PROCEEDINGS
8 PAGES + PRESENTATION

SHARE
Back to Top