Controlling mode instabilities at 628 W average output power in an Yb-doped rod-type fiber amplifier by active modulation of the pump power

Christoph Stihler; Cesar Jauregui; Hans-Jürgen Otto; Jens Limpert; Andreas Tünnermann

doi:10.1117/12.2252135

22 February 2017 Controlling mode instabilities at 628 W average output power in an Yb-doped rod-type fiber amplifier by active modulation of the pump power

Christoph Stihler, Cesar Jauregui, Hans-Jürgen Otto, Jens Limpert, Andreas Tünnermann

Author Affiliations +

Proceedings Volume 10083, Fiber Lasers XIV: Technology and Systems; 100830P (2017) https://doi.org/10.1117/12.2252135
Event: SPIE LASE, 2017, San Francisco, California, United States

Abstract

The phenomenon of transverse mode instabilities (TMI) is currently the most limiting effect for the scaling of the average output power of fiber laser systems with nearly diffraction-limited beam quality. Thus, it is of high interest to develop efficient mitigation strategies to further enhance the performance of fiber laser systems. By actively modulating the pump power of an Yb-doped rod-type fiber amplifier, it was possible to weaken the thermally-induced refractive index grating along the fiber and, thus, to mitigate TMI to a large extent. A significant advantage of this approach is that it can be easily integrated in any existing fiber-laser system since no further optical components are needed. A function generator connected to the pump diode driver was used to achieve the modulation. With this setup we were able to extract a fully stabilized beam at ~ 1.5 times above the TMI threshold. Furthermore, a stabilization of the beam was still feasible at an average output power of 628 W, which is more than three times higher than the free-running TMI threshold of that particular fiber under identical conditions (e.g. seed power). This is the highest average output power reported from a single-channel rod-type fiber amplifier with a high-quality stabilized beam, to the best of our knowledge.

Citation Download Citation

Christoph Stihler, Cesar Jauregui, Hans-Jürgen Otto, Jens Limpert, and Andreas Tünnermann "Controlling mode instabilities at 628 W average output power in an Yb-doped rod-type fiber amplifier by active modulation of the pump power", Proc. SPIE 10083, Fiber Lasers XIV: Technology and Systems, 100830P (22 February 2017); https://doi.org/10.1117/12.2252135

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available