22 February 2017 Experimental and numerical analysis of high power Er:Yb co-doped fiber amplifiers
Author Affiliations +
We have recently demonstrated an Er:Yb fiber amplifier pumped off-peak at 940 nm which achieved 50.5% slope efficiency compared to 40.2% slope efficiency when pumped on-peak at 976 nm, the typical pumping wavelength for Er:Yb fiber. To further understand these results we implemented a model that predicts the behavior of high power Er:Yb-co-doped fiber amplifiers with strong correlation to data. Through this modeling effort, we were able to estimate the forward and backward energy transfer coefficients for the Er:Yb silicophosphate fiber used. We also conducted a theoretical cutback experiment to find the optimal amplifier fiber length for each pump wavelength.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Julia R. Limongelli, Julia R. Limongelli, Scott D. Setzler, Scott D. Setzler, Daniel Creeden, Daniel Creeden, } "Experimental and numerical analysis of high power Er:Yb co-doped fiber amplifiers", Proc. SPIE 10083, Fiber Lasers XIV: Technology and Systems, 100831O (22 February 2017); doi: 10.1117/12.2252300; https://doi.org/10.1117/12.2252300


Optical gain of single-mode short Er/Yb doped fibers
Proceedings of SPIE (October 25 2004)
Gain calculation for Er/Yb-doped fiber amplifiers
Proceedings of SPIE (June 07 2004)
Optical property of non uniform Er doped and Yb Er...
Proceedings of SPIE (December 03 2005)

Back to Top