22 February 2017 Optics for multimode lasers with elongated depth of field
Author Affiliations +
Proceedings Volume 10085, Components and Packaging for Laser Systems III; 100850K (2017); doi: 10.1117/12.2249535
Event: SPIE LASE, 2017, San Francisco, California, United States
Modern multimode high-power lasers are widely used in industrial applications and control of their radiation, especially by focusing, is of great importance. Because of relatively low optical quality, characterized by high values of specifications Beam Parameter Product (BPP) or M², the depth of field by focusing of multimode laser radiation is narrow. At the same time laser technologies like deep penetration welding, cutting of thick metal sheets get benefits from elongated depth of field in area of focal plane, therefore increasing of zone along optical axis with minimized spot size is important technical task. As a solution it is suggested to apply refractive optical systems splitting an initial laser beam into several beamlets, which are focused in different foci separated along optical axis with providing reliable control of energy portions in each separate focus, independently of beam size or mode structure. With the multi-focus optics, the length of zone of material processing along optical axis is defined rather by distances between separate foci, which are determined by optical design of the optics and can be chosen according to requirements of a particular laser technology. Due to stability of the distances between foci there is provided stability of a technology process. This paper describes some design features of refractive multi-focus optics, examples of real implementations and experimental results will be presented as well.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alexander Laskin, Vadim Laskin, Aleksei Ostrun, "Optics for multimode lasers with elongated depth of field", Proc. SPIE 10085, Components and Packaging for Laser Systems III, 100850K (22 February 2017); doi: 10.1117/12.2249535; https://doi.org/10.1117/12.2249535

Laser cutting

Laser optics


Laser applications


High power lasers

Beam shaping


High power beam analysis
Proceedings of SPIE (February 20 2014)
Multi-focus beam shaping of high power multimode lasers
Proceedings of SPIE (August 25 2017)
Beam shaping of focused radiation of multimode lasers
Proceedings of SPIE (February 15 2018)
Intensity increasing up to 4 MW cm2 with BALB's via...
Proceedings of SPIE (February 23 2009)
Wavelength dependency in high power laser cutting and welding
Proceedings of SPIE (February 06 2012)
The Laser vs the Electron Beam In Welding And Surface...
Proceedings of SPIE (October 21 1986)

Back to Top