Translator Disclaimer
Presentation + Paper
24 February 2017 Individualized FAC on bottom tab subassemblies to minimize adhesive gap between emitter and optics
Author Affiliations +
Proceedings Volume 10086, High-Power Diode Laser Technology XV; 100860U (2017)
Event: SPIE LASE, 2017, San Francisco, California, United States
High Power Diode Laser (HPDL) systems with short focal length fast-axis collimators (FAC) require submicron assembly precision. Conventional FAC-Lens assembly processes require adhesive gaps of 50 microns or more in order to compensate for component tolerances (e.g. deviation of back focal length) and previous assembly steps.

In order to control volumetric shrinkage of fast-curing UV-adhesives shrinkage compensation is mandatory. The novel approach described in this paper aims to minimize the impact of volumetric shrinkage due to the adhesive gap between HPDL edge emitters and FAC-Lens. Firstly, the FAC is actively aligned to the edge emitter without adhesives or bottom tab. The relative position and orientation of FAC to emitter are measured and stored.

Consecutively, an individual subassembly of FAC and bottom tab is assembled on Fraunhofer IPT’s mounting station with a precision of ±1 micron.

Translational and lateral offsets can be compensated, so that a narrow and uniform glue gap for the consecutive bonding process of bottom tab to heatsink applies (Figure 4). Accordingly, FAC and bottom tab are mounted to the heatsink without major shrinkage compensation.

Fraunhofer IPT’s department assembly of optical systems and automation has made several publications regarding active alignment of FAC lenses [SPIE LASE 8241-12], volumetric shrinkage compensation [SPIE LASE 9730-28] and FAC on bottom tab assembly [SPIE LASE 9727-31] in automated production environments. The approach described in this paper combines these and is the logical continuation of that work towards higher quality of HPDLs.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sebastian Sauer, Tobias Müller, Sebastian Haag, Andreas Beleke, Daniel Zontar, Christoph Baum, and Christian Brecher "Individualized FAC on bottom tab subassemblies to minimize adhesive gap between emitter and optics", Proc. SPIE 10086, High-Power Diode Laser Technology XV, 100860U (24 February 2017);

Back to Top