21 April 2017 High-speed ultrafast laser machining with tertiary beam positioning (Conference Presentation)
Author Affiliations +
Abstract
For an industrial laser application, high process throughput and low average cost of ownership are critical to commercial success. Benefiting from high peak power, nonlinear absorption and small-achievable spot size, ultrafast lasers offer advantages of minimal heat affected zone, great taper and sidewall quality, and small via capability that exceeds the limits of their predecessors in via drilling for electronic packaging. In the past decade, ultrafast lasers have both grown in power and reduced in cost. For example, recently, disk and fiber technology have both shown stable operation in the 50W to 200W range, mostly at high repetition rate (beyond 500 kHz) that helps avoid detrimental nonlinear effects.

However, to effectively and efficiently scale the throughput with the fast-growing power capability of the ultrafast lasers while keeping the beneficial laser-material interactions is very challenging, mainly because of the bottleneck imposed by the inertia-related acceleration limit and servo gain bandwidth when only stages and galvanometers are being used. On the other side, inertia-free scanning solutions like acoustic optics and electronic optical deflectors have small scan field, and therefore not suitable for large-panel processing. Our recent system developments combine stages, galvanometers, and AODs into a coordinated tertiary architecture for high bandwidth and meanwhile large field beam positioning. Synchronized three-level movements allow extremely fast local speed and continuous motion over the whole stage travel range. We present the via drilling results from such ultrafast system with up to 3MHz pulse to pulse random access, enabling high quality low cost ultrafast machining with emerging high average power laser sources.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chuan Yang, Chuan Yang, Haibin Zhang, Haibin Zhang, } "High-speed ultrafast laser machining with tertiary beam positioning (Conference Presentation)", Proc. SPIE 10092, Laser-based Micro- and Nanoprocessing XI, 100921B (21 April 2017); doi: 10.1117/12.2253528; https://doi.org/10.1117/12.2253528
PROCEEDINGS
PRESENTATION ONLY


SHARE
RELATED CONTENT

Material processing with fiber based ultrafast pulse delivery
Proceedings of SPIE (February 19 2018)
Trends in laser micromachining
Proceedings of SPIE (March 04 2016)
Ultrafast lasers as a versatile processing tool
Proceedings of SPIE (February 07 2000)
Metal Precision Drilling with Lasers
Proceedings of SPIE (October 21 1986)

Back to Top