22 February 2017 Fiber based flexure sensor utilizing the sensitivity of evanescent coupling
Author Affiliations +
Abstract
Sensing in harsh environments, such as in high magnetic fields like those found within MRI machines or in high-voltage conditions like those found within power transformers lends itself well for the use of fiber optic sensors. Where conventional electronic sensors fail for obvious reasons, specially designed fiber optic sensors can fill in these gaps. The aim of this research was to investigate the feasibility and technical parameters necessary to design a flexure sensor based on evanescent coupling between the modes of a two- (or more) core fiber. The design parameters are discussed and the sensitivity of the sensor is shown to be tunable by modifying variables which the coupling constant is sensitive to. The physical model used to simulate this system is derived from an effective index change due to a combination of strain and an effective path difference which is induced by bending the fiber. The result of this model is a coupled-mode equation that can be systematically solved using an eigenvector approach to mode coupling. With proper fiber drawing techniques, this model predicts measurement sensitivities of curvature down to km-1. Furthermore, this technique can be extended based on simulated long-wavelength measurements to make predictions about where along the length of the fiber the flexing took place. This system has the potential to be used as a competing system for Rayleigh backscattering based flexure measurements.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
B. Nelsen, B. Nelsen, F. Rudek, F. Rudek, Ch. Taudt, Ch. Taudt, T. Baselt, T. Baselt, P. Hartmann, P. Hartmann, } "Fiber based flexure sensor utilizing the sensitivity of evanescent coupling", Proc. SPIE 10098, Physics and Simulation of Optoelectronic Devices XXV, 100981C (22 February 2017); doi: 10.1117/12.2252153; https://doi.org/10.1117/12.2252153
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Co-Axial, Double Waveguide Single-Mode Fiber Coupler
Proceedings of SPIE (October 14 1987)
Fiber optic evanescent-wave sensor
Proceedings of SPIE (February 14 2005)
Novel NDE fiber optic corrosion sensor
Proceedings of SPIE (May 30 1996)
Multi-use D-fiber sensors
Proceedings of SPIE (April 15 2011)

Back to Top