16 February 2017 Investigation of GaN Fin-HEMTs with micron-scale fin width
Author Affiliations +
Abstract
In this paper, we utilize the fin-shaped channel to form the AlGaN/GaN HEMTs which can be considered as “Fin- HEMTs” to adjust the threshold voltage (VTH) toward positive value. The gate metal here is deposited directly on the AlGaN/GaN semiconductor to form the Schottky contact. Although the fin-widths are in the level of micron-scale, the shifts of VTH are still observable and the VTH becomes more positive with the smaller fin width. This is attributed to the assistant of the side-gate control which can be regarded as the depletion layer formed by Schottky contact at side-gate will deplete the 2DEG in the channel. Therefore, with the smaller fin width, the channel can be pinched off faster which is similar to the double gate MESFETs. The VTH of planar device is shifted from -3.81 V to -3.37 V with 2-μm-fin-width. On the other hand, unlike to carrier transportation in the conventional FinFET with nano-scale fin width which is dominated by the surface scattering, our Fin-HEMTs with micron-scale fin width exhibit higher drain current than planar device and this is because of the smaller thermal resistance (RTH) for the fin-HEMT. We extract the RTH by varying the measured temperature and the RTH of the device with 4-μm-fin-width and planar device is 58.5 K/W and 249.5 K/W, respectively.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Li-Cheng Chang, Li-Cheng Chang, Ming Yang, Ming Yang, Yi-Hong Jiang, Yi-Hong Jiang, Chao-Hsin Wu, Chao-Hsin Wu, } "Investigation of GaN Fin-HEMTs with micron-scale fin width", Proc. SPIE 10104, Gallium Nitride Materials and Devices XII, 101041F (16 February 2017); doi: 10.1117/12.2257211; https://doi.org/10.1117/12.2257211
PROCEEDINGS
6 PAGES + PRESENTATION

SHARE
Back to Top