27 January 2017 Filter-free measurements of black carbon absorption using photoacoustic spectroscopy
Author Affiliations +
A photoacoustic (PA) spectrophone was developed for filter-free measurement of black carbon (BC) mass absorption coefficient (MAC) in the spectral region of ~ 442 nm using a blue diode laser. The PA sensor was characterized and calibrated using NO2 at standard calibrated concentrations, as well as at indoor and outdoor air concentrations via a side-by-side intercomparison with a commercial NOx analyzer. Black carbon (graphite) and volcanic ash samples were measured under laboratory condition. MAC of BC and volcanic ash sample were determined based on the measured particles optical absorption coefficient by the PA spectrophone, in combination with the mass concentration measured using a scanning mobility particle sizer (SMPS). A minimum detectable absorption coefficient (1σ) of ~ 1.2 Mm-1 for BC was achieved with a time solution of 1 second.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gaoxuan Wang, Gaoxuan Wang, Hongming Yi, Hongming Yi, Patrice Hubert, Patrice Hubert, Alexandre Deguine, Alexandre Deguine, Denis Petitprez, Denis Petitprez, Rabih Maamary, Rabih Maamary, Eric Fertein, Eric Fertein, Julien M. Rey, Julien M. Rey, Markus W. Sigrist, Markus W. Sigrist, Weidong Chen, Weidong Chen, } "Filter-free measurements of black carbon absorption using photoacoustic spectroscopy", Proc. SPIE 10111, Quantum Sensing and Nano Electronics and Photonics XIV, 1011136 (27 January 2017); doi: 10.1117/12.2251093; https://doi.org/10.1117/12.2251093

Back to Top