Since lens array is a repeated system, realization of a small part of lens array is enough to show its property. The lens array is composed of nine (3 by 3) liquid droplets on flat surface. On substrate, 11 line electrodes are patterned along vertical and horizontal direction respectively. The width of line electrodes is 300um and interval is 200um. Each droplet is positioned to contain three electrode lines for both of vertical and horizontal direction. So there is one remaining electrode line in each of outermost side for both direction. In original state the voltage is applied to inner electrodes. When voltage of outermost electrodes are turned on, eight outermost droplets move to outer side, thereby increasing pitch of lens array. The original pitch was 1.5mm and it increased to 2.5mm after electrodes of voltage applied is changed.
ACCESS THE FULL ARTICLE
YooKwang Kim, Jin Su Lee, Junoh Kim, Yong Hyub Won, "Pitch variable liquid lens array using electrowetting," Proc. SPIE 10116, MOEMS and Miniaturized Systems XVI, 101160A (20 February 2017);