Paper
23 December 2016 Automatic device for measuring biomechanical properties of cadaveric lumbar vertebrae of the human spine
Luděk Bartoněk, Vladislav Janák, Jiří Keprt
Author Affiliations +
Proceedings Volume 10142, 20th Slovak-Czech-Polish Optical Conference on Wave and Quantum Aspects of Contemporary Optics; 1014217 (2016) https://doi.org/10.1117/12.2262461
Event: 20th Slovak-Czech-Polish Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 2016, Jasna, Slovakia
Abstract
A new special second-generation computer-controlled device has been developed for measuring biomechanical characteristics of the lower part of the spine vertebras L1–L5 [1]. During straining and measurement of the rigidity of the sample as a whole it is also necessary to observe the movement of individual parts of the sample and to measure their mechanical resistances. The measurement of displacement and rotation of individual parts of the studied model was evaluated by optical methods based on the principle of moiré interferometry and fast Fourier transform [2]. During this device development and its verification the lumbar samples were replaced with a system of wooden rollers with system discrete rubber pads. The new computer-controlled device containing four stepper motors, four strain gauges and two CCD cameras.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Luděk Bartoněk, Vladislav Janák, and Jiří Keprt "Automatic device for measuring biomechanical properties of cadaveric lumbar vertebrae of the human spine", Proc. SPIE 10142, 20th Slovak-Czech-Polish Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 1014217 (23 December 2016); https://doi.org/10.1117/12.2262461
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spine

Cameras

LabVIEW

Control systems

Measurement devices

Switches

Calibration

Back to Top