24 March 2017 Impact of tool design on defect detection sensitivity for EUV actinic blank inspection
Author Affiliations +
Abstract
In this paper, we discuss the impact of various tool design perspectives on defect detection sensitivity for dark-field based EUV actinic blank inspection. We consider the impact from optical resolution (pixel size), EUV source type, and photon collection efficiency on critical defect SNR performance. The results show that as the pixel size approaches the target defect image size, defect SNR increases, and that pixel size also determines the dominant noise source in the inspection system. Moreover, the choice of the EUV source affects the optimal NA and illumination settings. For plasma-discharged sources, more photons provided by larger partial coherent illumination can improve the defect SNR, while coherent illumination is needed to get a higher defect SNR for synchrotron-based source. In the end, we show that simply increasing the photon collection efficiency by using high NA optics or increasing the source power cannot always improve the defect SNR. In a speckle noise dominated situation, larger outer NA includes more noise than defect signal, thus results in a lower SNR. The impact of source power also saturates at certain level as the system becomes speckle noise limited compared to photon noise limited.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yow-Gwo Wang, Yow-Gwo Wang, Andy Neureuther, Andy Neureuther, Patrick Naulleau, Patrick Naulleau, } "Impact of tool design on defect detection sensitivity for EUV actinic blank inspection", Proc. SPIE 10143, Extreme Ultraviolet (EUV) Lithography VIII, 101430M (24 March 2017); doi: 10.1117/12.2260193; https://doi.org/10.1117/12.2260193
PROCEEDINGS
7 PAGES + PRESENTATION

SHARE
Back to Top